SKW Small Flange Remote Seal Type Pressure Transmitter
measuring the flow,level
Sample Lead Time::
silver and atrovirens
High accuracy and stability
Packaging & Delivery
1Pcs/Ctn for pressure transmitter,Packing Size: 65*30*30cm/ctn
15-30 days after deposit received
Directly connectable to 1½in and 2in flanges The transmitter is connectable to 40A(1½B) and 50A(2B) pipes without a reducer.
Minimum environmental influence The Advanced Cell design, which protects the pressure sensor against changes in temperature, static pressure, and overpressure substantially reduces total measurement error in actual field applications.
Application flexibility Various options that render the CXT suitable for almost any process applications include: – Built-in RFI filter and lightning arrester – 5-digit LCD meter with engineering unit – Stainless steel electronics housing – Wide selection of anticorrosion materials
– High temperature, high vacuum seals
Span, range Span (kPa) Range (kPa) Over range Type Min. Max. LRL URL MPa SKW 1 25 250 According to 250 0.5 SKW 2 80 800 the lower 800 1 SKW 3 300 3000 range 3000 4.5 SKW 4 1000 10000 limit of 10000 15
SKW 5 4000 40000 the filled fluid 40000 60
Work pressure Pressure is recommended to be less than flange rating.
Process temperature, Lower range limit Fill Fluid 13th digit code Process temperature Lower range limit
Silicone oil Y, G (-40~180)℃ 2.7kPa abs
Silicone oil S (-15~250)℃ 2.7kPa abs Silicone oil T (20~320)℃ 2.7kPa abs Fluorinated oil W, A, D (-20~120)℃ Atmospheric pressure Silicone oil H (-15~250)℃ Atmospheric pressure Silicone oil J (20~320)℃ Atmospheric pressure Silicone oil K (-15~200)℃ 0.13kPa abs C3H8O2 F (-15~120)℃ Atmospheric pressure
Performance Specifications for Linear Output (Silicone oil fill, 316L SST isolating diaphragms.)
Accuracy rating (including linearity, hysteresis, and repeatability) Standard: For spans greater than 1/10 of URL: ±0.25% of span Option (For 21st digit code H and K): For spans greater than 1/10 of URL: ±0.1% of span Stability ±0.2% of upper range limit (URL) for 10 years. Temperature effect Effect per 28℃ change between the limits of -15℃ and +65℃ Zero shift: ±0.5% of URL /28℃ (When span ≥ 1/6.5 URL) /28℃ (When span < 1/6.5 URL) Total effect: ±0.75% of URL /28℃ (When span ≥ 1/6.5 URL) /28℃ (When span < 1/6.5 URL) Note: Above specifications are based on the conditions that flange and sensor unit is at the same temperature and in the same level. If temperature is different at flange, capillary or sensor unit, output variation may increase. Over range effect Zero shift: ±0.2% of URL for any over range to maximum limit
Process-wetted parts material Material code Diaphragm & flange face Wetted sensor body V, A, B, C, D 316L SST 316 SST H Hastelloy-C Hastelloy-C J 316L SST + Au coating 316 SST M Monel Monel T Tantalum Tantalum P Titanium Titanium Mounting flange material 304 SST or carbon steel and 10, 40MPa is threaded connection (threaded materials: carbon steel). Non-wetted parts material Electronics housing Low copper die-cast aluminum alloy finished with polyester coating (silver), or CF8M, as specified. Electronics housing cover Low copper die-cast aluminum alloy finished with polyester coating (atrovirens), or CF8M, as specified. Environmental protection IEC IP67 Mass (weight) Transmitter approximately 5 to 13kg without options Electrical connections ½-14NPT or M20×1.5 conduit, as specified. External terminal M4 screw Process connections ANSI, DIN, HG, GB raised face flange. Diaphragm extension 0mm, 50mm, 100mm or 200mm,Please state when ordering. Mounting On 50A(2B) pipe using mounting bracket, Process-wetted use flange mounting, flange clamping method(Wafer type),threaded connection (adaptor). Transmission unit position The transmission unit can be turned at 90° or 180°in the clockwise or counterclockwise direction. Length of capillary Up to 10 meters For 7th digit code H,J,S,T,K and capillary more than 7 meters, ambient temperature <+50℃. Armor of capillary PVC or Stainless steel
SKWEN Small Flange Remote Seal Type Pressure Transmitter
Sample Cost,The cost will be returned after placing an order
Sample Lead Time
T/T, LC at sight,west union,paypal
carton package with protection material
Ningbo or Shanghai
Q: Are you a manufacture or a trading company?
A: We are a 20-year-manufacturer engaged in the field of cleaning products, and we have got the permit of import and export as well.
Q: Where is your factory located? How can I visit there?
A: Our factory is located in Hangzhou, China. 25 Minutes by car far away from Xiaoshan Airport.
Q: How can I get the samples? What's the lead time?
A: Samples could be sent within one week, the lead time is 35-45 days..
Q: Do you provide ODM/OEM service?
A: OEM/ODM is welcome, there are 25 persons in our R&D team, and customized colours is optional. From the concept to finished goods, we do all (design, prototype reviewing, tooling and production) in the factory.