High accuracy ±0.15% accuracy for all calibrated spans is the standard feature for differential pressure (flow) transmitter covering 4 to 250kPa. The compositive monocrystalline piezoresistive sensor assures this accuracy for all elevated or suppressed calibration ranges without additional adjustment.
Unique hydroseal diaphragm Permeation of hydrogen into the detecting unit through seal diaphragm can be suppressed thanks to the unique seal diaphragm which employs coating of gold.
Minimum environmental influence The Advanced Cell design, which protects the pressure sensor against changes in temperature, static pressure, and overpressure substantially reduces total measurement error in actual field applications.
Application flexibility Various options that render the CXT suitable for almost any process applications include: –Full range of hazardous area approvals – Built-in RFI filter and lightning arrester – 5-digit LCD meter with engineering unit – Stainless steel electronics housing – Wide selection of anticorrosion materials
Span, range Static pressure Span (kPa) Range (kPa) Type (MPa) Min. Max. LRL URL SKC 33 -0.1~16 0.4 40 -40 +40 SKC 35 -0.1~16 2.5 250 -250 +250
Process temperature, Lower range limit Fill Fluid 13th digit code Process temperature Lower range limit Silicone oil Y, G, N (-20~120)℃ 2.7kPa abs Fluorinated oil W, A, (-10~80)℃ Atmospheric pressure Note: For explosion proof units, process temperature is (-20~120)℃.
Performance Specifications for Linear Output Accuracy rating (including linearity, hysteresis, and repeatability) Standard at 23℃: ±0.15%Span Temperature effect Effect per 28℃ change between the limits of -40℃ and +85℃ Stability ±0.15% of upper range limit (URL) for 10 years. Mounting position effect Zero shift: less than 0.12kPa for a 10° tilt in any place (0.24kPa for 13th digit code "W","A").No effect on span. This error can be corrected by adjusting zero.
Performance Specifications for Square Root Output Accuracy rating Output Accuracy (50~100)% ±0.15% (20~50)% ±0.375% (10~20)% ±0.75% Temperature effect Effect per 28℃ change between the limits of -20℃ and +85℃ Low flow cut-off for square root output Customer configurable for any point between 0 to 20% of output
Physical Specifications Process-wetted parts material Material code Process cover Process-wetted body Diaphragm Wetted sensor body C CF8M 316L SST 316 SST
Remarks: Availability of above material design depends on ranges. Refer to "Ordering Code". Non-wetted parts material Electronics housing Low copper die-cast aluminum alloy finished with polyester coating (silver), or CF8M, as specified. Electronics housing cover Low copper die-cast aluminum alloy finished with polyester coating (atrovirens), or CF8M, as specified. Environmental protection IEC IP67 Mass (weight) Transmitter approximately 3.1 to 3.6kg without options Electrical connections ½-14NPT or M20×1.5 conduit, as specified. External terminal M4 screw Process connections ¼-18NPT Mounting On 50A(2B) pipe using mounting bracket, direct wall mounting or direct process mounting. Transmission unit position The transmission unit can be turned at 90° or 180°in the clockwise or counterclockwise direction.
Sample Cost,The cost will be returned after placing an order
Sample Lead Time
T/T, LC at sight,west union,paypal
carton package with protection material
Ningbo or Shanghai
Q: Are you a manufacture or a trading company?
A: We are a 20-year-manufacturer engaged in the field of cleaning products, and we have got the permit of import and export as well.
Q: Where is your factory located? How can I visit there?
A: Our factory is located in Hangzhou, China. 25 Minutes by car far away from Xiaoshan Airport.
Q: How can I get the samples? What's the lead time?
A: Samples could be sent within one week, the lead time is 35-45 days..
Q: Do you provide ODM/OEM service?
A: OEM/ODM is welcome, there are 25 persons in our R&D team, and customized colours is optional. From the concept to finished goods, we do all (design, prototype reviewing, tooling and production) in the factory.