Directly connectable to 1-½in and 2in flanges The transmitter is connectable to 1-½in and 2in pipes without a reducer.
Connectable to ½in and ¾in pipes Use of direct mounting adapter allows the transmitter to be connected to the following process. Screw connection ½-14NPT, ¾-14NPT.
Minimum environmental influence The Advanced Cell design, which protects the pressure sensor against changes in temperature, static pressure, and overpressure substantially reduces total measurement error in actual field applications.
Application flexibility Various options that render the CXT suitable for almost any process applications include: –Full range of hazardous area approvals – Built-in RFI filter and lightning arrester – 5-digit LCD meter with engineering unit – Stainless steel electronics housing – Wide selection of anticorrosion materials – High temperature, high vacuum seals
Span, range Span (kPa) Range (kPa) Type Min. Max. LRL URL SKX 4 6 40 -40 40 SKX 5 25 250 -250 250 SKX 6 80 800 -800 800 SKX 7 300 3000 -3000 3000
Work pressure Pressure is recommended to be less than flange rating.
Process temperature, Lower range limit Fill Fluid 13th digit code Process temperature Lower range limit Fluorinated oil W, A, D (-20~120)℃ Atmospheric pressure Silicone oil H (-15~250)℃ Atmospheric pressure Silicone oil J (20~320)℃ Atmospheric pressure Silicone oil Y, G (-40~180)℃ 2.7kPa abs Silicone oil S (-15~250)℃ 2.7kPa abs Silicone oil T (20~320)℃ 2.7kPa abs Silicone oil K (-15~200)℃ 0.13kPa abs C3H8O2 F (-15~120)℃ Atmospheric pressure
Performance Specifications for Linear Output (Silicone oil fill, 316L SST isolating diaphragms.)
Accuracy rating (including linearity, hysteresis, and repeatability) Standard: For spans greater than 1/10 of URL: ±0.25% of span Option (For 21st digit code H and K): For spans greater than 1/10 of URL: ±0.1% of span Stability ±0.2% of upper range limit (URL) for 10 years. Temperature effect Option (For 21st digit code J and K): For spans greater than ¼ of URL: Zero shift: ±0.3% of URL /28℃ Total effect: ±0.4%of URL /28℃ Note: Above specifications are based on the conditions that flange and sensor unit is at the same temperature and in the same level. If temperature is different at flange, capillary or sensor unit, output variation may increase. Over range effect For 7th digit code V: Zero shift: ±0.1% of URL for flange rating pressure For 7th digit other codes: Zero shift: ±0.2% of URL for flange rating pressure Static pressure effect For 7th digit code V: Zero shift: ±0.2% of URL/ 1MPa Span shift: -0.2% of span/ 1MPa For 7th digit other codes: Zero shift: ±0.4% of URL/ 1MPa Span shift: -0.2% of span/ 1MPa Mounting position effect Zero shift: less than 0.3kPa for a 10° tilt in any place. (0.6kPa for 13th digit code "W","D","A")
Physical Specifications 304 SST or carbon steel Process-wetted parts material Material code Diaphragm & flange face Wetted sensor body V, A, B, C, D 316L SST 316 SST H Hastelloy-C Hastelloy-C J 316L SST + Au coating 316 SST M Monel Monel T Tantalum Tantalum Non-wetted parts material Electronics housing Low copper die-cast aluminum alloy finished with polyester coating (silver), or CF8M, as specified. Electronics housing cover Low copper die-cast aluminum alloy finished with polyester coating (atrovirens), or CF8M, as specified. Environmental protection IEC IP67 Mass (weight) Transmitter approximately 10 to 20kg without options Electrical connections ½-14NPT or M20×1.5 conduit, as specified. External terminal M4 screw Process connections ANSI, DIN, HG, GB raised face flange. Diaphragm extension 0mm, 50mm, 100mm or 200mm,Please state when ordering. Mounting On 50A(2B) pipe using mounting bracket, Process-wetted use flange mounting, flange clamping method(Wafer type) Transmission unit position The transmission unit can be turned at 90° or 180°in the clockwise or counterclockwise direction. Length of capillary Up to 10 meters For 7th digit code H,J,S,T,K and capillary more than 7 meters, ambient temperature <+60℃. Armor of capillary PVC or Stainless steel
SKX Small Flange Remote Seal Type Differential Pressure Transmitter
Sample Cost,The cost will be returned after placing an order
Sample Lead Time
T/T, LC at sight,west union,paypal
carton package with protection material
Ningbo or Shanghai
Q: Are you a manufacture or a trading company?
A: We are a 20-year-manufacturer engaged in the field of pressure transmitter products, and we have got the permit of import and export as well.
Q: Where is your factory located? How can I visit there?
A: Our factory is located in Hangzhou, China. 25 Minutes by car far away from Xiaoshan Airport.
Q: How can I get the High Quality factory directly pressure transmitter samples? What's the lead time?
A: Samples could be sent within one week, the lead time is 35-45 days..
Q: Do you provide pressure transmitter ODM/OEM service?
A: OEM/ODM is welcome, there are 25 persons in our R&D team, and customized colours is optional. From the concept to finished goods, we do all (design, prototype reviewing, tooling and production) in the factory.
Transaction History of the Supplier
Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.