1Pcs/Ctn for pressure transmitter,Packing Size: 42*35*30cm/ctn
15-30 days after deposit received
High accuracy 0.2% accuracy for all calibrated spans is a standard feature for all models covering 0.32kPa range to 500kPa high differential pressure range. 0.1% accuracy is available as option. The compositive monocrystalline piezoresistive sensor assures this accuracy for all elevated or suppressed calibration ranges without additional adjustment.
Minimum environmental influence The Advanced Cell design, which protects the pressure sensor against changes in temperature, static pressure, and overpressure substantially reduces total measurement error in actual field applications.
Application flexibility Various options that render the CXT suitable for almost any process applications include: –Full range of hazardous area approvals – Built-in RFI filter and lightning arrester – 5-digit LCD meter with engineering unit – Stainless steel electronics housing – Wide selection of anticorrosion materials
– High temperature, high vacuum seals
Span, range Span (kPa) Range (kPa) Type Min. Max. LRL URL SKE 3 3 6 -6 6 SKE 4 4 40 -40 40 SKE 5 25 250 -250 250 SKE 6 80 800 -800 800 SKE 7 300 3000 -3000 3000 Note: LRL= Lower Range Limit; URL= Upper Range Limit. To minimize environmental influence, span should be greater than 1/40 of the max. span in most applications.
Work pressure Pressure is recommended to be less than flange rating.
Process temperature, Lower range limit Fill Fluid 13th digit code Process temperature Lower range limit Fluorinated oil W, A, D (-20~120)℃ Atmospheric pressure Silicone oil Y, G (-40~180)℃ 2.7kPa abs Silicone oil K (-15~200)℃ 0.13kPa abs C3H8O2 F (-15~120)℃ Atmospheric pressure Note1: Low-pressure side contact liquid temperature is 120℃ or lower. Note2: For explosion proof and intrinsic safety units, process
Performance Specifications for Linear Output (Silicone oil fill, 316L SST isolating diaphragms.)
Accuracy rating (including linearity, hysteresis, and repeatability) Standard: For spans greater than 1/10 of URL: ±0.2% of span Option (For 21st digit code H and K): For spans greater than 1/10 of URL: ±0.1% of span Stability ±0.2% of upper range limit (URL) for 10 years. Temperature effect Option (For 21st digit code J and K): For spans greater than ¼ of URL: Zero shift: ±0.3% of URL /28℃ Total effect: ±0.4%of URL /28℃ Note: Above specifications are based on the conditions that flange and sensor unit is at the same temperature and in the same level. If temperature is different at flange, capillary or sensor unit, output variation may increase. Over range effect For 7th digit code V: Zero shift: ±0.1% of URL for flange rating pressure For 7th digit other codes: Zero shift: ±0.2% of URL for flange rating pressure Static pressure effect For 7th digit code V: Zero shift: ±0.2% of URL/ 1MPa Span shift: -0.2% of span/ 1MPa For 7th digit other codes: Zero shift: ±0.4% of URL/ 1MPa Span shift: -0.2% of span/ 1MPa Mounting position effect Zero shift: less than 0.3kPa for a 10° tilt in any place (0.6kPa for 13th digit code "W","D","A").No effect on span. This error can be corrected by adjusting zero.
Physical Specifications Process-wetted parts material Material code (7th digit in "Ordering Code") HP side LP side Diaphragm & flange face Wetted sensor body Diaphragm Process cover V 316L SST 316 SST 316L SST CF8M J 316L SST + Au coating 316 SST 316L SST CF8M C Hastelloy-C 316 SST 316L SST CF8M D Monel 316 SST 316L SST CF8M E Tantalum 316 SST 316L SST CF8M H Hastelloy-C Hastelloy-C Hastelloy-C CF8M M Monel Monel Monel CF8M T Tantalum Tantalum Tantalum CF8M P Titanium Titanium 316L SST CF8M Mounting flange material 304 SST or carbon steel Non-wetted parts material Electronics housing Low copper die-cast aluminum alloy finished with polyester coating (silver), or CF8M, as specified. Electronics housing cover Low copper die-cast aluminum alloy finished with polyester coating (atrovirens), or CF8M, as specified. Environmental protection IEC IP67 Mass (weight) Transmitter approximately 10 to 20kg without options Electrical connections ½-14NPT or M20×1.5 conduit, as specified. External terminal M4 screw Process connections LP side: ¼-18NPT HP side: ANSI, DIN, HG, GB raised face flange. Diaphragm extension 0mm, 50mm, 100mm or 200mm,Please state when ordering. Mounting flange mounting Transmission unit position The transmission unit can be turned at 90° or 180°in the clockwise or counterclockwise direction.
Sample Cost,The cost will be returned after placing an order
Sample Lead Time
T/T, LC at sight,west union,paypal
carton package with protection material
Ningbo or Shanghai
Q: Are you a manufacture or a trading company?
A: We are a 20-year-manufacturer engaged in the field of cleaning products, and we have got the permit of import and export as well.
Q: Where is your factory located? How can I visit there?
A: Our factory is located in Hangzhou, China. 25 Minutes by car far away from Xiaoshan Airport.
Q: How can I get the 2 hours replied factory directly smart pressure transmitters samples? What's the lead time?
A: Samples could be sent within one week, the lead time is 35-45 days..
Q: Do you provide 2 hours replied factory directly smart pressure transmitters ODM/OEM service?
A: OEM/ODM is welcome, there are 25 persons in our R&D team, and customized colours is optional. From the concept to finished goods, we do all (design, prototype reviewing, tooling and production) in the factory.